Are you experiencing a signal loss on your monitor when you play games and don’t know what to do?
Well, don’t be alarmed. This article was published to teach you What to do when your monitor loses signal while gaming. Buying or repairing a damaged monitor can be costly. Read this article to see what you can do about the problem, and hopefully, you’ll be able to resolve the issue without needing to buy another monitor.
First, we’ll look at why your monitor is losing signal in the first place, then provide a solution to each scenario.
Why Your Monitor Loses Signal When Gaming
- Outdated or Corrupt Drivers
An inoperative, outdated, or infected driver might cause your monitor not to receive a signal during playing. Look for updates to your driver and then apply them to determine whether it can solve the issue.
If the issue remains unresolved and your screen keeps turning off during gaming, remove the driver and install them again.
Be sure to make use of ensuring that you use your GPU software for installation as well as reinstallations and updates.
When running an AMD graphics card, you can use AMD Radeon software. AMD Radeon application to install your graphics drivers. However, If you have an NVIDIA graphics card, then the GeForce Experience software is the best tool to use.
- BIOS Firmware Glitch or Wrong Installation
Although the possibility of a BIOS glitch with the firmware isn’t a common occurrence it can result in many issues if it occurs.
Additionally, installing and downloading BIOS from websites that are not affiliated with the manufacturer could result in issues for your computer and monitor conduct in general. A broken or incompatible BIOS may prevent your computer from starting, and the damage could be permanent in some instances.
Make sure you update your BIOS with the manufacturer of your motherboard. Also, ensure that your BIOS is compatible with your computer and be cautious in installing your BIOS.
You can check best monitor for eye strain reviews
What To Do When Monitor Loses Signal While Gaming
STEP 1: Check Your Power and Cables
Before you go to Amazon to purchase a new monitor, make sure you take a thorough examination of your PC and monitor to make sure that the cables are in good working order and that both devices are receiving sufficient power.
It is possible to carry out this test by following all cables connected to your monitor and computer. Make sure there aren’t any loose connections between the two devices.
A broken HDMI cord could prevent your computer from connecting to your monitor at the correct output, losing signal when you play.
Another cable is aware of is the display cable. Make sure it’s not damaged or defective. If the cable you have is worn out, purchase an upgrade or locate another. This will instantly fix the screen display and allow you to enjoy your gaming.
The power issue can also hinder your monitor from turning on or functioning correctly.
If your monitor is turned on, but you’re seeing an error message that says “No Signal,” it could be that your computer is malfunctioning or isn’t functioning correctly.
If your computer is running well, but your monitor doesn’t show something, then your monitor is the problem. Always connect your PC and monitor into a surge protector to shield the devices from power surges that aren’t consistent.
STEP 2: Check Your Input Source
If you’re not receiving any signal during games, the source of your input may be affected.
The monitor could not recognize or transfer only a portion of the graphics output from your computer. This is a common issue when your monitor’s input source is set to a different device.
Gaming monitors come with various input sources, such as HDMI, DVI, and VGA inputs. These inputs let you attach your display to several devices.
The devices you connect to could include the PC you own, PS5, Xbox, or perhaps multiple computers. Then you’ll need physical controls or the firmware of your monitor to transfer between the devices.
If this is true, make sure you have set the correct input source for your monitor.
If this isn’t the case, you can try using other inputs, such as DVI and HDMI, to transmit signals from the computer directly to your display.
STEP 3: Make Sure Your Monitor Isn’t Overheating
If your computer suddenly loses the video signal, it could be because of the temperature being too high. Monitors are designed to shut down if the temperature gets excessively high.
This method lets them keep the electronics inside their circuits. There are numerous reasons that a computer monitor could overheat, such as dust buildup, blocked vents, and high humidity or heat.
To resolve this issue, unplug your monitor and let it cool completely. Then, try to clean the buildup of dust out of the casing of your monitor using canned air.
Also, take a look at the temperature of your computer’s room. If you find it too hot, you can cool it off with an air conditioner or an air conditioner. Be sure to let the room be extremely cool before switching off your monitor.
Older CRT monitors can get hot very quickly. If you’re using one of them, replacing your monitor to fix the heat problems is possible.
STEP 4: Make Sure Your GPU Isn’t Overheating (Graphics Processing Unit)
If your computer isn’t sending signals to your display, It could be the consequence due to it being the result of your GPU overheating.
The average temperature for the GPU in games is between 65° Celsius between 85 and 65 degrees Celsius. It is possible to use tools for diagnosis such as Speccy to determine the GPU temperature.
If you notice the GPU you’re using is heating up, It is recommended to cool it down before continuing playing. Once it’s cool enough, plug the monitor into your computer and determine if the problem is fixed.
GPUs are prone to overheating if they don’t receive enough air or block their cooling system.
The temperature in your room could contribute to why your GPU has been overheating. Make sure that you clean your GPU, remove dust particles, and control the temperature in your gaming area.
Also, you should clear the vents to ensure adequate airflow and to modify your cooling device.
Check that your PC is turned off and unplugged before performing any maintenance work on it. Be sure not to employ a damp, spongy towel to scrub your computer and its parts because doing so could result in permanent damage to the components and perhaps even to the motherboard.
Check Your Monitor Resolution
The majority of monitors are made to display a specific set of resolutions. When your graphic card sends a resolution higher than your monitor’s specified range, the monitor will likely stop working or display a blank screen or display a blank signal message.
It’s good to know that the solution to this problem is simple. All you have to do is alter the display settings.
If you alter the resolution on your own and you notice that the resolution of your monitor has decreased, wait around 15 seconds, and Windows will then automatically restore to the original resolution.
Suppose you did not alter the display settings on your own. In that case, Windows might have automatically altered your monitor’s resolution to a higher resolution. This could be the reason your monitor is losing signal or stop working. To resolve this issue, just restart your device in safe mode.
Your computer will be using a low resolution in safe mode. In this mode, you’ll be able to set the default display settings to a resolution suitable for the monitor you’re using.
Check your monitor’s manufacturer’s website or manual to determine which resolution for your monitor. If you can’t find it, you’ll have to test it out to find the optimal resolution for your screen.
This can be done by testing different resolutions. Windows will always return to the resolution you had previously used before plugging in the monitor if the monitor doesn’t support the resolution.
Make Sure Your Monitor Isn’t Defective.
A monitor that loses signal when gaming could be due to defective circuitry inside the monitor. If there’s a malfunction in the circuitry or wiring short, the monitor may periodically lose signal or simply disappear altogether. If this happens, the best solution is to replace the malfunctioning monitor.
Restoring a monitor is a lengthy process and can cost lots of dollars. Repairing your monitor could be enough to pay for purchasing a new computer or an entirely new monitor.
To ensure your monitor is responsible, Try testing the monitor with a different computer as you test your PC using a different monitor.
If you are experiencing the same issue on your monitor, it could be time to replace the monitor. However, if your monitor is functioning and the second monitor is not working or shutting off in random intervals, it could be that your computer is the cause.
Make sure that the drivers on both the PC that you are using and the monitor are in good condition to determine the issue.
Conclusion
In this article, we’ve discussed why your monitor may lose signal and solutions to restore your monitor’s signal when gaming. Here’s a summary of those solutions:
- If your computer has a problem that causes it to lose signal, the driver update could fix the problem.
- Be sure to install BIOS updates directly from the motherboard’s manufacturer.
- Be sure to use authentic power cables and connectors.
- Verify the source of your input to determine if it’s connected or not.
- Put the monitor inside a calm and relaxed place.
- Make sure you have a surge protector on your monitor and computer.
- Ensure that the resolution your PC outputs is in line with what your monitor will show.
If your computer isn’t sending signals directly to your display, try testing it on other devices.
